upload
United States Bureau of Mines
Industry: Mining
Number of terms: 33118
Number of blossaries: 0
Company Profile:
The U.S. Bureau of Mines (USBM) was the primary United States Government agency conducting scientific research and disseminating information on the extraction, processing, use, and conservation of mineral resources. Founded on May 16, 1910, through the Organic Act (Public Law 179), USBM's missions ...
A stoping method in which the ore is excavated by successive flat or inclined slices, working upward from the level, as in shrinkage stoping. However, after each slice is blasted down, all broken ore is removed, and the stope is filled with waste up to within a few feet of the back before the next slice is taken out, just enough room being left between the top of the waste pile and the back of the stope to provide working space. The term cut-and-fill stoping implies a definite and characteristic sequence of operations: (1) breaking a slice of ore from the back; (2) removing the broken ore; and (3) introducing filling.
Industry:Mining
A stoping method used in thicker ore where it is customary first to take out a slice or heading 7 to 8 ft (2.1 to 2.4 m) high directly under the top of the ore and then to bench or stope down the ore between the bottom of the heading and the bottom of the ore or floor of the level. The heading is kept a short distance in advance of the bench or stope.
Industry:Mining
A stoping method used in thicker ore where it is customary first to take out a slice or heading 7 to 8 ft (2.1 to 2.4 m) high directly under the top of the ore and then to bench or stope down the ore between the bottom of the heading and the bottom of the ore or floor of the level. The heading is kept a short distance in advance of the bench or stope.
Industry:Mining
A stoping system in which the ore is broken down by large blasts into the stopes, which are kept partly full of broken ore. The large blasts break ore directly into the stopes and have the further effect of shattering additional ore, part of which then caves.
Industry:Mining
A stopping in which the floor and the sidewalls of the passage are built of sandbags, and the roof may be the roof of the roadway or covering boards used between the webs of steel arches, or preferably, corrugated steel sheeting used as lagging behind steel arches. The plughole or passage is generally tapered from the inby end from 3 to 3.5 ft (0.9 to 1.1 m) square to 2.5 ft (0.76 m) square so that, in the event of an explosion, the plug of sandbags in the passage is subjected to a wedging action assisting to retain the plug in place. The plughole may be placed in the most convenient position and although this is often at the top, it is sometimes placed to the side and reasonably near the floor.
Industry:Mining
A stove for drying gunpowder; drying oven.
Industry:Mining
A stove tender at blast furnaces.
Industry:Mining
A straight line; the shortest distance between two points.
Industry:Mining
A straight or curved hairlike crystallite, usually black. Trichites occur singly or radially arranged in clusters and are found in glassy igneous rocks.
Industry:Mining
A straight or curved length of steel, usually of H or channel section, used for support purposes in mine roadways, faces, or shafts. A steel support (1) possesses a high degree of permanency or long service; (2) ensures a minimum area of excavation for given dimensions in the clear; and (3) is fireproof. In return airways and shafts, a chromenickel- copper steel is sometimes used to counteract the corrosive air. For high-strength roof bars best results are obtained by the use of heat-treated low-alloy steels of the carbon manganese type.
Industry:Mining
© 2024 CSOFT International, Ltd.